Tricks for Changing CSC Code While Flashing the Stock Firmware
Sometimes when you just flashed the stock firmware it will not change the CSC code in jut one way around. The below method might help to obtain the CSC file you want.
- Make sure to recharge your phone before anything else.
- Fully back-up all important data stored from your phone. You may use Kies 3 to back up and restore or through your Google and Samsung account.
1. Run and configure Odin. Do not check “Re-Partition” and “Auto Reboot” check boxes.
2. Load the stock firmware in the PDA button.
3. Set the phone in download mode (Volume Down+Home+Power button). Then connect the phone in your computer.
4. Hit the “Start” button and then wait.
5. Once the flashing successfully completed. Do not let it reboot into the normal mode.
6. Reboot into recovery mode (Volume Up+Home+Power button).
7. See if it’s applying the CSC file then wait until it finishes and reboot.
8. If you do not see the CSC installation, instead choose the “Wipe data/Factory reset”. Then repeat flashing the stock firmware. You may then achieved the CSC code flashing the stock firmware on the second attempt.
10. Confirm the CSC code by using Kies 3 and see if the CSC code has changed.
Có bác nào thử giúp em làm cách này xem có ok ko ạ
Hiện nay, có khá nhiều sản phẩm dương vật giả giá rẻ xuất hiện trên thị trường. Chúng đến từ các nhà sinh sản ở khắp nơi trên thế giới như Mỹ, Nhật, Hồng Kông…Hơn nữa, các đồ chơi này cũng khá đa...
Top các loại buoi giả rẻ và tốt...